The Maker's Black Friday Playbook for 2026

November 19, 2026  ·  VARØ Industries
← Back to Blog

Black Friday is genuinely good for makers and genuinely bad for shops. It is the one week of the year when big machines actually move on price — and it is also the week most people buy a tool they have no project for, which then sits in the corner accusing them for two years.

This is not a list of specific deals, because prices move and a post written in advance that quotes numbers is a post that lies to you by December. It is the decision framework: what is worth waiting for, what never discounts meaningfully, and how to tell the difference before you spend anything.

The one rule: write your list before the sales start. If a tool is not on a list you wrote in advance, a discount is not a reason to buy it — it is the reason you are about to. That single habit is worth more than any specific deal on this page.

Worth Waiting For

Laser Cutters and CNC Machines

The big-ticket items are where the real money is, and the discounts are real rather than theatrical. On a machine in the four-figure range, a seasonal promotion is worth hundreds of dollars — more than any amount of careful shopping on consumables will ever save you.

Two things to get right. First, stack the manufacturer's referral or affiliate discount with the seasonal sale if they allow it; many do, and nobody asks. My Glowforge referral link is good for up to $500 off a Pro, $250 off a Plus and $125 off a Basic year-round — mkr.ms/glowforge — and that is before whatever the seasonal promotion is.

Second, budget for the running costs, not just the machine. This is the part that catches people. A laser needs extraction, and filter cartridges are a recurring expense that can run $250 each with real lead times attached — which is why I vented mine through the wall instead. Work out your total first-year cost before deciding what you can afford; I go through it in running a laser cutter safely indoors and whether a Glowforge is worth it.

Power Tools You Have Already Chosen

The emphasis is on already chosen. If you have been researching a specific tool for months and know exactly which model, this is the week. If you are browsing power tools to see what is cheap, close the tab — that is how a corner full of unused tools happens.

Dust Collection and Air Filtration

Boring, expensive, and the thing everyone postpones. It rarely goes on sale at other times because nobody impulse-buys a dust collector. If it is discounted, buy it: it is the single purchase with the clearest long-term return, and the return is your lungs.

Software and Subscriptions

Annual software deals are frequently the steepest discounts available, because the marginal cost of a licence is nothing. Design software, CAM software, royalty-free music for anyone making videos. If you are already paying monthly for something, switching to an annual plan during a sale is close to free money — and if you are not already paying for it, the discount is not a reason to start.

Not Worth Waiting For

CategoryWhy
Consumables — glue, finish, abrasivesDiscounted in rotation all year. Buy when you need them.
Sheet goods and lumberPriced on commodity markets, not retail calendars.
Anything with a standing discount codeMany brands run a permanent 5–10% affiliate code. Check before assuming Black Friday beats it.
Hand toolsQuality hand tools hold their price. A steeply discounted one is usually a different, worse tool.
Small accessoriesThe absolute saving is trivial and you lose more waiting.
Anything you will not use before springStorage is a cost, and enthusiasm has a shelf life.

That third row is the one that catches people. Several of the brands I use run a standing discount year-round — Kutzall carving tools, TotalBoat finishes, CarveCo CAM software, Eye Candy pigments, Taylor Toolworks, Boss Dog glue, MagSwitch, Rustic Lumber Store, YesWelder. Before you wait a week for a sale, check whether the everyday code is already as good. Sometimes it is better, and it is available in March.

Where the Money Actually Goes Wrong

Three failure modes, in descending order of expense:

  1. Buying the machine and not the infrastructure. A laser without extraction, a CNC without hold-down and bits, a welder without gas and PPE. The accessory cost on a big tool routinely runs 20–30% on top, and it is not optional. Budget it into the purchase or the tool sits unused.
  2. Buying capability you have no project for. Capability without a project is storage. The honest test is whether you can name the specific thing you will make in the first month.
  3. Buying the upgrade instead of the missing thing. A better version of a tool you already have is far less valuable than the tool you do not have at all. The upgrade is more appealing because you already know you like the category. That is exactly why it is the wrong purchase.

If You Sell Things, This Week Is Not About Buying

Worth saying, since a lot of makers are on both sides of this. Black Friday through Cyber Monday is the highest-traffic window of the year for a small shop, and the preparation that matters is unglamorous: inventory counted, listings accurate, shipping supplies stocked, and pricing checked against your actual costs rather than last year's.

That last one is where margin quietly disappears. If material costs or postage have moved since you set a price — and they have — a busy week at the wrong price loses money faster than a slow one. The vendor tools cover the arithmetic: pricing, credit card fees, sales tax and break-even on a booth.

And if you make content as well as products, the affiliate side is worth setting up before the traffic arrives rather than during it. MakerManifest is what I use to keep gear lists and referral links in one place instead of scattered across video descriptions.

The Short Version

The genuinely good version of this week is getting a machine you have researched for six months at several hundred dollars off, with the extraction and accessories budgeted in. The bad version is a 30%-off tool with no project. Both feel identical on the day.

Frequently Asked Questions

Is Black Friday actually a good time to buy a laser cutter or CNC?
Yes — big-ticket machines are where the discounts are real rather than theatrical, and on a four-figure machine a seasonal promotion is worth hundreds of dollars. Two things to do: check whether the manufacturer lets you stack a referral or affiliate discount on top of the sale, and budget the running costs and accessories before deciding what you can afford.
What maker purchases are not worth waiting for Black Friday?
Consumables like glue, finish and abrasives, which are discounted in rotation all year. Sheet goods and lumber, which are priced on commodity markets rather than retail calendars. Quality hand tools, which hold their price — a steeply discounted one is usually a different and worse tool. And anything already covered by a standing year-round discount code.
How do I avoid buying a tool I don't need just because it's discounted?
Write your list before the sales start, and only buy from the list. If a tool was not on a list you wrote in advance, the discount is not a reason to buy it — it is the reason you are about to. The honest test for anything is whether you can name the specific thing you will make with it in the first month.
What is the most commonly forgotten cost when buying a big tool?
The infrastructure around it. A laser without extraction, a CNC without hold-down and bits, a welder without gas and PPE. The accessory cost on a major tool routinely runs 20 to 30 percent on top of the purchase price and it is not optional — budget it into the decision or the machine sits unused.
Do referral discounts stack with seasonal sales?
Often, and almost nobody asks. Many manufacturers allow a referral or affiliate discount alongside a seasonal promotion. It is worth a single message to the vendor before buying, because on a large machine the combined saving can be substantially more than either discount alone.
Are software subscriptions worth buying on Black Friday?
If you already pay monthly for something, switching to an annual plan during a sale is close to free money, because the marginal cost of a licence is nothing and annual deals are frequently the steepest discounts available. If you are not already paying for it, a discount is not a reason to start.
What should I buy instead of an upgrade to a tool I already have?
The tool you do not have at all. An upgrade is far less valuable than filling a genuine gap in your capability, but it feels more appealing precisely because you already know you like the category. That familiarity is what makes it the wrong purchase.
If I sell handmade goods, what should I do before Black Friday?
Count inventory, check listings for accuracy, stock shipping supplies, and re-check pricing against your current costs rather than last year's. If material costs or postage have moved and your prices have not, a high-traffic week at the wrong price loses money faster than a slow week does.
← Back to Blog

Sources & References

  1. Prime Day 2026: The Best Maker Deals — VARØ Industries Blog
  2. Is a Glowforge Worth It in 2026? — VARØ Industries Blog
  3. How to Run a Laser Cutter Safely Indoors — VARØ Industries Blog
  4. How MakerManifest Works — VARØ Industries Blog
  5. Laser Cutting vs CNC Routing — VARØ Industries Blog
  6. Free Vendor Tools — pricing, fees, sales tax and break-even calculators — VARØ Industries
  7. Glowforge — referral link, up to $500 off a Pro