Guessing at feeds and speeds is how router bits get burned or broken. I've done my share of both, which is why I built a free CNC feeds and speeds calculator for wood routers. This short video shows how it works.
Three Choices
You tell it three things:
- Your material
- The bit you're using
- Whether it's a roughing or a finishing pass
What You Get Back
From that it gives you the four numbers you need to set up the job:
- Spindle speed
- Feed rate
- Step down
- Step over
The Speed Dial Setting
If your machine runs a router with a numbered speed dial rather than a spindle, pick your router and the calculator gives you the closest setting on the speed dial, so you're not left translating an RPM into a dial number yourself.
On the workshop tools page I put it simply: enter your material, bit type and number of flutes and get recommended feeds and speeds for your CNC router. No more guessing, no more burnt edges.
Try it: feedsandspeeds.us is free and needs no sign-up.
Free, No Sign-Up
There's no account to make and nothing to install. Open it in a browser next to your CAM software, pick the material and bit for the job you're about to run, and copy the numbers across. When you swap from a roughing pass to a finishing pass, switch the pass type and you get a new set.
Related Reading
If you're still deciding between machines, I wrote about laser cutting vs CNC routing. For router templates rather than CNC paths, have a look at Rideline, and for working out how much wood to buy, the board foot calculator. More free tools are on the VARØ Industries apps page.
More short how-tos on the VARØ Industries YouTube channel.