Not sure which switch plate you need? Send me a photo. This 33-second short covers the easiest way to get it to me and how to take a photo I can actually match from.
How to Send It
- On Etsy: you can attach photos only after I've replied to your first message, so send a quick note first. Once I answer, reply with the photo. My shop is VARØ Industries on Etsy.
- By email: send it to [email protected]. Check your junk folder for my reply, since the domain is a little unusual and some mail filters don't know what to make of it.
How to Take the Photo
Take the photo straight on, with the whole plate in the shot. That's all I need to match you to the right plate. If you'd rather work it out yourself first, these posts cover the usual questions:
- What a gang is and how to count them
- How to measure switch plate screw holes
- Whether you need a backing plate
- The wood switch plate buyer's guide for woods, finishes, screws and sizes
The sizing, wood types and fit guide is also a good reference, and you can browse everything on the switch plates page.
I'm not a licensed electrician; I just make switch plates. Any work on electrical system components is done at your own risk and/or should be done by a licensed professional. Always turn off power at the breaker and verify it's off before working near wiring.
Where to Shop
Once we know what you need, you'll find the wood switch and outlet plates and the backing plates in 1 to 6 gang in the shop.
More short how-tos on the VARØ Industries YouTube channel.