Every wood switch plate I make comes with two choices that change how it looks on the wall: which way the grain runs, and what the corners look like. This short video covers both in under half a minute, and here is the quick version in writing.
Grain Direction
By default the grain runs vertically on the plate. If you would rather have it run horizontally, you can ask for that instead.
- Vertical is the default
- Horizontal is available on request
Neither one is right or wrong. It comes down to what you like the look of in your room.
Corner Style
The default corner is rounded, with a small 1/10" roundover. If you prefer a crisper look, you can choose square corners instead.
- Rounded is the default, with a small 1/10" roundover
- Square is available if you want sharp corners
How to Choose Them When You Order
You pick both options in the personalization section when you place your order. If you leave it alone, you get the defaults: vertical grain and rounded corners.
While you are choosing, the wood switch plate buyer's guide walks through woods, finishes, screws and sizes. If you are wondering about the dark edges on a finished plate, see why the edges of a wood switch plate are dark. And if your switch or outlet sits out from the wall, read do you need a backing plate? or browse backing plates in 1 to 6 gang.
I'm not a licensed electrician; I just make switch plates. Any work on electrical system components is done at your own risk and/or should be done by a licensed professional. Always turn off power at the breaker and verify it's off before working near wiring.
You can browse the full range of wood switch and outlet plates, see them on the VARØ Industries switch plates page, read the sizing, wood type and fit guide at switchplates.info, or find everything in my Etsy shop.
More short how-tos on the VARØ Industries YouTube channel.