How to Order the Right Switch Plate: Types, Gangs, GFCI, Rocker vs. Toggle and Backing Plates

November 21, 2026  ·  VARØ Industries
← Back to Blog

Most of the questions I get before someone orders a switch plate come down to the same handful of things: what kind of switch or outlet is on the wall, how many of them share the box, and whether the plate needs a little extra depth. This video walks through all of it in about four minutes, with a longer post linked for each step.

1. Switch and Outlet Types

Start by identifying what's actually on your wall. The opening in the plate has to match the device, so a plate for a toggle switch won't fit a duplex outlet and vice versa. See Toggle, Decora or Duplex? Switch and Outlet Types and Types of Electrical Outlets in the US.

2. What's a Gang?

"Gang" is just the number of devices the plate covers side by side. One switch is a 1-gang plate, two switches next to each other is a 2-gang plate, and so on. Count the devices in the box and that's your gang count. More on that in What Is a Gang on a Switch Plate?

3. GFCI, USB, Smart Switches and Dimmers

Good news here: GFCI outlets, USB outlets, smart switches and most dimmers all share the same rectangular Decora opening. If the face of the device is a rectangle, choose Rocker/Decora. No special "GFCI plate" needed. More in GFCI, USB Outlet or Smart Switch? Which Switch Plate You Need.

4. Toggle vs. Rocker

This is one of the most common ordering mistakes I see. A toggle is the little lever you flip up and down, and it needs a small rectangle opening. A rocker is the big flat paddle you press, and it uses the large Decora opening. The two aren't interchangeable, and a box with more than one switch can mix them, so check each one. The full breakdown is in Toggle or Rocker Switch Plate? How to Order the Right Opening.

5. Do You Need a Backing Plate?

My wood switch plates are flat and slim. If your switch or outlet sits a little proud of the wall, a backing plate (available 1 to 6 gang) raises the plate so it sits right over the device. Here's how to check before you order, and how to attach one once it arrives.

Safety note: I'm not a licensed electrician; I just make switch plates. Any work on electrical system components is done at your own risk and/or should be done by a licensed professional. Always turn off power at the breaker and verify it's off before working near wiring.

6. Not Sure? Send Me a Photo

If you're still not sure which plate you need, send me a photo of your existing plate through my Etsy shop and I'll point you to the right one. There's a short video on that too: Not Sure Which Switch Plate You Need? Send Me a Photo.

Once you know what you need, browse the wood switch and outlet plates, or check switchplates.info for sizing, wood types and fit.


More short how-tos on the VARØ Industries YouTube channel.


More short how-tos on the VARØ Industries YouTube channel.

Frequently Asked Questions

What does gang mean on a switch plate?
It is the number of switches or outlets the plate covers side by side. A single switch takes a 1-gang plate, two side by side take a 2-gang plate, and so on.
Do I need a backing plate?
Only if your switch or outlet sits out from the wall. The wood plates are flat, and a backing plate (available 1 to 6 gang) raises the plate so it sits over the device.
What if I'm not sure which plate I need?
Send a photo of your existing plate through the VARO Industries Etsy shop and you'll get pointed to the right one.

Sources & References

  1. Watch on YouTube: How to Order the Right Switch Plate
  2. Wood switch and outlet plates
  3. Backing plates (1 to 6 gang)
  4. Sizing, wood types and fit guide
  5. VARO Industries on Etsy
  6. VARØ Industries