My standard lineup covers 16 options, but sometimes you want something a little different. This short walks through the specialty and exotic woods I can make wood switch plates from by request. They aren't part of the everyday menu, but if one of these is the look you're after, I can usually make it happen.
Specialty Veneers
These are available as veneer plates:
- Gray Elm
- Anigre
- Birdseye Maple
- Cypress
- Quartered Ash
- Afromosia
- Teak
- Black Limba
- Eucalyptus
- Lacewood
- Jatoba
- Rosewood
Solid Wood, Finished on Both Sides
A handful of species are available as solid wood plates, finished on both sides:
- Spruce
- Poplar
- Lacewood
- Bubinga
- Padauk
You'll notice Lacewood shows up on both lists, so you can pick it as a veneer or as solid wood.
How to Order One
These woods are not always in stock, so the best thing to do is message me before ordering. I'll let you know the lead time and pricing for whichever species you have in mind.
If you'd rather start with what's ready to go, see all 16 standard species lined up lightest to darkest, or read the wood species guide for switch plates and the buyer's guide covering woods, finishes, screws and sizes.
For sizing, wood types and fit, switchplates.info has it all in one place. You can browse the range on the switch plates page, through my wood switch and outlet plates, or in the VARØ Industries Etsy shop, which is also the easiest place to send me a message about a specialty wood.
Safety note: I'm not a licensed electrician; I just make switch plates. Any work on electrical system components is done at your own risk and/or should be done by a licensed professional. Always turn off power at the breaker and verify it's off before working near wiring.
More short how-tos on the VARØ Industries YouTube channel.